Pay attention to the following points when using the die cutting machine:

1、Use a wrench to turn the drive shaft, make the pressure frame reciprocating action several times, observe whether there is any jamming phenomenon.

2、The motor and electrical parts of the dry insulation is good.

3、The safety protection switch is normal and reliable.

4、Inject lubricating oil before operation.

5、Check whether the screws and nuts of each part are loose, if found, it should be solved in time.

6、Check whether the brakes are flexible in the process of moving the equipment.

7、Press the motor start button after the power is turned on, and wait for the flywheel to rotate for a certain period of time before the machine is put into work.

8、When the distance between the flat plate of the machine base and the flat plate of the press frame needs to be adjusted, the power supply should be cut off to ensure safety.

9、Strictly prohibited in the seat plate and the press frame plate between the grabbing paper!

Understand the precautions to achieve safe use.