As we know, during the production and processing of corrugated cardboard, it is necessary to use a cross cutter to cut the cardboard, so as to form a board that is convenient for processing in the next process. However, the structure of most cross cutters is to install cross cut rollers directly on the frame, so that they lie horizontally on the conveyor belt for cutting, with the bottom supporting the corrugated board through the conveyor belt, which is of low strength and not conducive to stable cutting. Moreover, when checking the blades, it is necessary to operate the machine while standing on the frame, which is poorly secured, and interfering with each other is not conducive to operation.

    The automatic spiral cross cutter is a new type of cross cutter with a new structure. By installing support rolls on the frame, combining the support seats on both sides with the hinged connecting seats, and then rotating and installing the cross cut rolls, the machine can stably press and support the corrugated cardboard for cutting, which is stable and highly efficient, and at the same time it can be turned over to the angle of the road on one side, which is favorable for inspecting the blades and facilitates maintenance and replacement, which greatly improves the convenience and stability of the machine and ensures maintenance and safety. Maintenance effect and safety. Specific features are organized as follows:

    1、Automatic spiral cross-cutting machine can be installed by installing the support rolls on the frame, combined with the two sides of the support seat hinged connecting seat, and then rotating and installing the cross-cutting rolls, which can be stably pressed to support the corrugated cardboard for cutting, which is stable and efficient, and at the same time, it can be turned over to the Angle Road side of the position, which is conducive to the checking of the blades, and is convenient for the maintenance and replacement.

    2. Install the drive motor through the fixed seat, which can rotate with the cross-cutting roller to ensure the stability of use.

    3、Connecting the fixed seat to the inside of the open groove, which is good for supporting and positioning, convenient and stable.

    4、Positioning the fixing seat from the side through the fixing screw, which is stable and reliable, avoiding interference and convenient for adjustment.

    By connecting the conveyor rollers to the conveyor belt, the corrugated paper can be conveyed on both sides, which is good for continuous feeding and ensures the production efficiency.

    6、By connecting the limit block to the inside of the ring-shaped limit groove, the axial movement of the conveyor belt can be avoided, which improves the stability of transportation and ensures the precision and quality of cutting.

    7、Automatic spiral cross cutting machine can convey corrugated paper and push out the cut cardboard on the other side by arranging the conveyor on both sides, which is convenient, efficient and favorable for use.