Now the safety of the slitting machine is a great concern to us, if the slitting machine can not work properly for safety, then how to guarantee the safety of the staff? The following slitting machine manufacturers tell you the safety factors affecting.

1. Double button operation principle. This requires two buttons are pressed at the same time, otherwise the cutter motor will not move, which can ensure the absolute safety of single operation.

2. Braking device. Many manufacturers in order to save money, the use of circuit brakes, that is, through the upper and lower limit sensors to cut off the cutter motor power supply brakes, this device in the case of a sudden power outage, loose sockets, sensors failures, etc., which may result in the “slippery knife,” and other extremely dangerous conditions. In order to eliminate the occurrence of this situation, it is necessary to use the motor assembly with a mechanical brake device, so that no matter what circuit failure occurs, the motor is held dead to avoid accidents.

3. The above are the safety factors affecting the use of the process, then in the maintenance, maintenance should pay attention to the replacement of the blade, the use of the knife holder, to ensure that the edge of the blade is closed, not only to ensure the safety of people, but also to ensure that the edge is not damaged.

4. In the actual use of the process, often two people cooperate with the operation, so that the situation becomes very dangerous, which requires the configuration of the paper cutter before and after the safety cover. When the safety cover is opened, the motor will not move to ensure safety.

5. Further, the unloaded blade must not be arbitrarily set aside to avoid injury to people.

After reading the above, I believe we all already know the safety influencing factors of the slitting machine.