Automatic slitter equipment in the paper processing industry plays a very large role in the use of the process will inevitably fail, that will cause certain obstacles to the production process, manufacturers will also have losses. If the staff in the daily maintenance has paid attention to the words, generally will not have any problems. Let us Zhejiang slitter equipment manufacturers to talk about how to solve the following problems.
Automatic slitter equipment common troubleshooting methods :
1 automatic slitting machine rewinding is not aligned, mostly due to the core is not applicable, as long as the replacement of the core to meet the requirements of the inner diameter of the paper will be able to, in addition to the process of rewinding, you should also use the rewinding pressure roller, so you can avoid rewinding the problem of non-alignment.
2. meter counting is not allowed, encountered this problem, you can count the meter wheel double wheels at the same time to contact the feed rollers, and in the meter wheel to make a mark on the hand shaking 5 laps for the counting of 1 meter or else to replace the meter.
3. semi-finished products in the middle of the slack, which is uneven with the glue, the substrate is not flat has a close relationship, at this time should be adjusted to the bow roller to support its flat, or increase the tension of the unwinding shaft, with the knife tube compaction substrate.
4. Semi-finished products in the winding wrinkles, can be appropriate to increase the pressure of the tension cylinder.
5. When the finished product is rolled up and run, whether the tension of the unwinding shaft is too tight, or it is closely related to the glue when gluing.