Nonwoven slitting machine consists of unwinding mechanism, cutting mechanism, rewinding mechanism, various function rollers and tension control, deskew control and detection devices; its working principle is as follows: the metallized film raw materials released from the unwinding mechanism, through the leveling rollers, tension detection rollers, empowering rollers, deskew system, into the cutting mechanism, raw materials after slitting, the rewinding mechanism were rewound into the film rolls in line with the standard.
1, loading: according to the requirements of the slitting planner, in accordance with the operating procedures of the traveling crane, according to the actual situation, the corresponding mother rolls are lifted on the aging frame, and the direction is selected according to the inside and outside of the corona surface and placed on the unwinding frame of the slitting machine, and the steel core is clamped with the control buttons, and left on the steel core support arm and the traveling crane.
2, wear film: when the film slitting machine in the upper no film, must be worn film; the use of slitting machine wear film device and function keys, the original film end tied to the eye of the wear film chain ring, start the wear film button, so that the film along the direction of the slitting process is distributed in the rolls flat.
3, pick up the film: when the slitting machine on the film, change the volume of the joints, the use of vacuum film receiving table, first of all, the film receiving table start to the working position, manually the slitting machine on the first haul-off rollers on the film spreading and open the upper part of the vacuum pump suction film, so that the film adsorbed in the flat film receiving table, stick on the double sided tape to cut off the tape under the excess film, the membrane on the unwinding frame spreading and start the lower part of the vacuum pump to make the film adsorbed, take down the tape on the layer of paper and Flatten the adhesive film, joints should be neat, no wrinkles, and then turn off the upper and lower vacuum pumps, the film receiving table to the non-working position.
4、Downloading：It refers to the operation process of taking down a certain shape, quantity or quality of material from the whole or the whole batch of material after determining the shape of the film or the shape, quantity or quality of the material required for making the product.
Adopting the upper and lower double pneumatic shafts in the same direction to the center of the winding mode, winding, unwinding of the clamping and knife shaft, pressure roller action of the pneumatic control, easy and fast operation. Single motor frequency conversion drive, synchronous belt drive, smooth and reliable operation, low noise; tension control magnetic powder clutch winding, magnetic powder brake unwinding, tension control with high precision, fast response, adjustable range; unwinding using superb analog photoelectric automatic deviation correction system, with static elimination device, blowing device, winding automatic meter counting. Each function can be configured according to customer requirements.