Automatic cross-cutting machine paper pileup is generally caused by the paper's missing corners, skewed, rolled edges and sticking and other problems, if the paper pileup together into the host, it is easy to cause bogging failure. So, how to deal with this problem?

    Automatic cross-cutting machine paper stacking processing precautions:

    1, the pile of paper to do a good job of paper loosening through the processing, in order to prevent adhesion.

    2, adjust the position of the paper pile and the paper stopper, the paper pile should be lower than the paper stopper.

    3, the paper walker on the pressure wheel needs to be installed, the position of the distribution of uniform, uniform pressure to ensure that the paper walk smoothly.

    4, the head of the fly two suction adjustment can be based on the direction of the paper out of the skewed fine-tuning, to ensure that the paper out of the paper edge neatly.

    5, the paper table is strictly prohibited to place foreign objects to prevent them from entering the host with the paper.

    6, to ensure that the side of the gauge and the correct position of the paper edge, the front side of the gauge and in and out of the paper photoelectric detection is safe and effective.

    The above is the automatic cross-cutting machine paper stacking processing precautions, I hope to help you.