First, the use of slitting machine environmental requirements:

The machine should be installed in a place with proper temperature, dryness, ventilation, good light and convenient operation. In addition, in the daily use, the use of the environment should be kept neat, but also often clean the machine to keep clean.

Second, the use of slitting machine operation requirements:

To use high-quality longitudinal cutting knife and cross-cutting knife; machine to the whole roll or sheet of raw materials for fixed length slitting processing; machine fixed-length slitting control needs to be divided into two kinds of static and dynamic slitting; machine fixed-length slitting the most important performance indicators is the accuracy of the slitting, the length of the finished product consistency is good; the machine's slitting length can be set up continuously, if the actual length of the actual slitting error, need to calibrate through the setting of the parameters of the way.

Third, the precautions for using the slitting machine:

Before starting the machine to ensure that the voltage, current and hydraulic pressure and other values of the correct, stable; machine ready to run, all personnel must be notified to leave, to ensure personal safety before starting the machine to run; machine in operation, do not touch the running film rolls or roll cores, so as not to involve the hand to cause personal injury; in the course of the operation, do not use a knife or a hard object scratching, cutting the machine's various roll cores.

Fourth, the use of slitting machine maintenance:

Electrical parts should be frequently checked, cleaned, and swept away in a timely manner hidden dangers; the rotating parts should be irregularly inspected, cleaned and lubricated, especially for wearing parts should be frequently inspected and replaced; to ensure that the machine's fasteners are not loose; to ensure that the sliding parts of the machine is in good condition.

Above from the use of the environment, operating requirements, precautions, maintenance of the four aspects of a simple introduction.

The use of slitting machine in addition to the four basic requirements mentioned above, in the daily use, should also improve the safety awareness of the operator and the degree of technology, and to regularly carry out a comprehensive overhaul of the machine and maintenance, improve productivity.